Powerful CO2 marking laser with RF laser tube 30-350W and worktable 200 x 200 to 1200 x 1200 mm

This CO2 marking laser has a 30-350W output and a work table of 200 x 200 to 1200 x 1200 mm. The machine has a 3D galvohead CTI made in the U.S.A. or Scanlab and electrical safety doors. This configuration has autofocus for marking uneven surfaces. It i possible to tak in 3D as well as reliefs....

This CO2 marking laser has a 30-350W output and a work table of 200 x 200 to 1200 x 1200 mm. The machine has a 3D galvohead CTI made in the U.S.A. or Scanlab and electrical safety doors. This configuration has autofocus for marking uneven surfaces. It i possible to tak in 3D as well as reliefs. Marking CO2 laser equip with the American RF laser tube (Rofin), which is metallic, air-cooled. Unlike standard CO2 lasers that are equipped with a glass tube and a mechanically movable head, this device is capable of much more accurate description due to a higher concentration of energy in the beam. A huge advantage is practically complete elimination of inaccuracies caused by mechanical vibrations of the machine, which, with the use of a galvanometric mechanism with a pair of deflected mirrors, practically do not occur. In addition to conventional cutting lasers, the marking CO2 lasers feature significantly higher marking speeds, up to several meters per second. Unlike cutting lasers, this speed does not practically drop with the complexity of the motif. Recently, in addition to marking, these machines are also used for complete processing in the textile industry, when a motif is first created on the textile or artificial leather, then a cut pattern is applied and usually the whole process ends directly with the cutting cut for subsequent processing.