Fiber cutting lasers
Professional enclosed HSG laser with output up to 15,000W
- Catalogue numberHS-G4015H
- Recommended power1000 - 15000 W
- Cover
- Working area4000x1500 mm
- Max movement speed140 m/min
- Positional accuracy0.05 mm
Professional, fully enclosed HSG laser with interchangeable tables for cutting sheets up to 4000x1500 mm...
Professional, fully enclosed HSG laser with interchangeable tables for cutting sheets up to 4,000x1,500 mm size. Designed to cut steel and stainless steel sheets, as well as metal sheets of various colors. The laser can be equipped with laser source ranging from 1000 to 15,000W.
Professional HSG laser machines from HS-GH series employ the same combination of servomotors and the system of a rack and a pinion as the one used in the HS-G series. Lightweight portal made of one-piece hard aluminium material, double drive and the aforementioned system ensure maximum speed of 140 m/min, as well as allowed accelerated speed of 1.5 G.
The machine chassis also includes control electronics, as well as other components needed for full functionality of the laser, such as PC with necessary SW for CNC machine manipulation and operation, industrial cooling and smoke outlet. After installing the laser source, you will receive fully functional machine, ready for work.
The machine chassis is not to be sold separately; you can purchase it only together with the selected laser source. Cutting speed of specific machines may be found in the download section or here.
The given price of the machine includes:
- complete CNC machine, ready to use
- industrial water cooler
- smoke outlet device
- PC with necessary SW for CNC machine manipulation and operation
- transport and complete installation of the machine anywhere in Czech Republic
- staff training and machine maintenance
- over-the-phone technical support
In the manufacture, the CNC machine chassis is first heated up to a temperature of 600 °C and then gradually cooled down according to a pre-set scheme in a cooling box for the period of 24 hours. Its machining is then performed with a special milling cutter with a length of 8 meters. Any welds are performed exclusively in a protective atmosphere. Thanks to this procedure, we can guarantee long duration of this machine without any mechanical deformations.
Compared to the other laser types, fiber lasers feature the highest efficiency (CO2 laser - 10%, YAG laser - 2%, fiber laser – 30~35%). Thanks to the routing of the laser beam through the optical fiber, they do not need any complex internal optics to make adjustments or any other internal moving parts. Fiber lasers thus have low operating and maintenance costs as well as very long service life of up to 80 - 100 hours. Compared to the conventional CO2 lasers, fiber lasers feature higher energy density of the laser beam (= laser beam energy concentrates on a smaller area). This ensures much narrower cuts with sharp edges for the fiber lasers. Thanks to this fact, even cutting of very fine structures is possible. Much higher cutting speed then ensures less temperature interference around the cut and minimizes possible deformations of the material due to heat.
- Machine size8900x2900x2200 mm
- Power supply without source13
- Exchangeable tables
- Cover
- Working temperature15 - 40 °C
- Working humidity< 90 %
- Working area4000x1500 mm
- Max. acceleration1.5 G
- Driving force transferToothed combs
- DriveServo motors
- SoftwareCypCUT
- Max movement speed140 m/min
- Positional accuracy0.05 mm
- Recommended power1000 - 15000 W
Get a price quote, including professional cost analysis
Our specialists will provide you with the best advice on which machine fits your business the best
How to choose a machine