Compact HSG fiber laser for cuting tubes and pipes up to 325 mm in diameter and up to 6000 mm long

Professional HSG laser machines from HS-E series employ combination of servomotors and ball screws cutting tubes and pipes up to 325 mm in diameter and up to 6000 mm in length. This system ensures a precision of 0.2 mm and a maximum speed of 60 m/min as well as allowed acceleration of 0.5 G. The...

Professional HSG laser machines from HS-E series employ combination of servomotors and ball screws cutting tubes and pipes up to 325 mm in diameter and up to 6000 mm in length. This system ensures a precision of 0.2 mm and a maximum speed of 60 m/min as well as allowed acceleration of 0.5 G. The laser can be equipped with laser source ranging from 1.000 to 3.000W. This HSG laser allows cutting of following items: • round pipes with diameter of 20 - 325 mm • square profiles 20*20 - 230*230 mm • elliptic, rectangular and hexagon profiles 20 - 230 mm in diameter • rectangular profiles 20*20 - 230*230 mm in diameter • hexagon profiles 20*20 - 230*230 mm in diameter The machine chassis also includes control electronics, as well as other components needed for full functionality of the laser, such as PC with necessary SW for CNC machine manipulation and operation, industrial cooling and smoke outlet. After installing the laser source, you will receive fully functional machine, ready for work. The machine chassis is not to be sold separately; you can purchase it only together with the selected laser source.   The given price of the machine includes:    - complete CNC machine, ready to use    - industrial water cooler    - smoke outlet device    - PC with necessary SW for CNC machine manipulation and operation    - transport and complete installation of the machine anywhere in Czech Republic    - staff training and machine maintenance    - over-the-phone technical support   In the manufacture, the CNC machine chassis is first heated up to a temperature of 600 °C and then gradually cooled down according to a pre-set scheme in a cooling box for the period of 24 hours. Its machining is then performed with a special milling cutter with a length of 8 meters. Any welds are performed exclusively in a protective atmosphere. Thanks to this procedure, we can guarantee long duration of this machine without any mechanical deformations. Compared to the other laser types, fiber lasers feature the highest efficiency (CO2 laser - 10%, YAG laser - 2%, fiber laser – 30~35%). Thanks to the routing of the laser beam through the optical fiber, they do not need any complex internal optics to make adjustments or any other internal moving parts. Fiber lasers thus have low operating and maintenance costs as well as very long service life of up to 80 - 100 hours. Compared to the conventional CO2 lasers, fiber lasers feature higher energy density of the laser beam (= laser beam energy concentrates on a smaller area). This ensures much narrower cuts with sharp edges for the fiber lasers. Thanks to this fact, even cutting of very fine structures is possible. Much higher cutting speed then ensures less temperature interference around the cut and minimizes possible deformations of the material due to heat.